12/17/2011

Bad Axe

I went to Bad Axe with John. We fixed his truck and milked cows.

Bad truck part.
broken radiator, dodge truck, dashboard
We had to remove the whole dashboard.
removing the dashboard of a dodge truck, guide, steps
removing the dashboard of a dodge truck, guide, steps, radiator
Milking cows, i think they have about 70.
milking cows on a farm in bad axe, pen, cage
milking cows on a farm in bad axe michigan, pen, cage, pit, heffers

12/12/2011

Signature to Photos

I decided that i should put my name and the date on some of the photos i upload to the blog. The way that i did it was to sign a piece of paper about fifty times. (not the actual way i sign my name for important documents though)

Then i scanned that paper and decided what signature i liked the best and isolated it. In Photoshop i fixed any out of place pixels and upped the contrast so there was only black and white.

Then i used the dreaded magic want tool, selected the background and deleted it. That way the signature would be transparent instead of always having a white background.
Here is what it looked like when i was done. add signature to photo, scan, transparent background, paste, layerIf the photo is dark where i want to put the signature then after pasting it in i just select "invert colors" and the signature will be white or gray. how to add a signature to photo you took, photoshop, paint, scan, copy

12/11/2011

Welders Glass ND Filter

I was reading online about a cheap alternative to a Neutral Density (ND) filter to use for photography. An ND filter is basically sunglasses for your camera. It decreases the amount of light that gets through, thus allowing you to keep the lens open longer. Neutral density filters can cost as much as $400 for a really nice one.

The cheap alternative is to use a welders glass. They type of glass that welders for eye protection against the bright light created during welding. So i went to Lowe's and bought one.
Welding Glass for Sale At Lowes, Home Depot, Hardware Store

Lowes lens dark, welders glass, for sale

Then because my new camera only has a small lens i decided to cut the glass down to about 2" x 2".
DIY, how to make an ND Filter, cut glass

And make a type of "dark housing" to fit over the camera lens. I used a piece of PVC pipe and
a permanent marker to color it black.

cut welding glass, darken case to prevent light, glare

Then glued it together.

assembled homemade ND filter

I used a rubber band to hold it onto the camera and some cloth on the edge so it wouldn't scratch anything.

completed ND filter for point and shoot camera, homemade, diy, New ND Filter design, homemade, make, weld glass, homemade, diy, nd filter on camera, Neutral Density
The two main problems with using the welders glass is that it is not as high a quality as an ND filter and that it has a green tint. This is what the image looks like right out of the camera. This was a 64 second exposure during the day.


RAW ND filter photo, green tint, welders glass

But in Photoshop this can be corrected, mainly by adjusting White Balance and Tint.

photoshop corrected RAW photo with ND filter

That design was not the best, it was too big and heavy. So i tried to simplify it.


I started with the same 2" square piece of glass that i cut from the larger glass. But then i used pliers as a kind of glass nippers and slowly broke off corners until it was round.
New ND Filter design, homemade, make, weld glass, homemade, diy, nd filter on camera, Neutral Density
I sanded and filed the sharp edge. Then just as before i glued it to a PVC pipe i colored black, inside and out. But the key difference is this time is that i glued a foam ring to the inside of the PVC.
assembled ND filter housing, foam, ring
point and shoot nd filter, homemade, make, diy
I sanded the foam down until i could slide it onto the outer lens, but with just enough pressure that it wouldn't fall off.homemade, diy, nd filter on camera, Neutral Density

I plan to use it when i'm in Tennessee to take pictures of some waterfalls.